Sp mode on ricoh sp3400sf

[sebreizh]

Hello, I need help with a Ricoh SP 3400 SF. I have service manual but I can not get into the SP mode. I tried "Clear" "1" "0" "7" "copy". I also handling the SP 3200, "menu" "#" "1" "9" "3" "4" "#". Someone has already seen this problem? it's pretty urgent.

Thanks.

[teebee1234]

I believe the issue is you're pressing "Copy" and not "Start"

From the manual...

5.1.2 MAINTENANCE MODE MENU
To access Maintenance Mode do the following:

• Type the following keys, in sequence: [Clear/Stop] > [1] > [0] > [7]

• Hold down the [Start Key] until the Maintenance Mode screen is displayed. Note: This should take about 3 seconds.

Selecting an Item
To select an item, press the "Up" or "Down" key.

Going into the Next Level/ Returning to the Previous Level

• To go into the next level of an item, select an item then press the "OK" key.

• To return to the previous level of an item, press the "Return" key.

Exiting the Maintenance Mode Menu
To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the
"Ready" display appears.

[sebreizh]

Thanks