I am installing a new drum in the existing drum/developing unit of the Ricoh Aficio 1013 that I am working on, and I am wondering if there is a Special Function that I will need to run after I do this? Any help appreciated, thank you.
-
-
I too have been using the Katun R 1013/1515 drum rebuild kits and was wondering how to get the replace PCU message to reset..? -
At time of copier installation
The first time the machine is turned on following installation, a factory-set flag
informs the machine that the PCU has not yet been initialized. The machine
carries out the necessary initialization automatically.
When a replacement PCU is installed
Replacement PCUs have a special mechanism that trips when they first start,
informing the machine that a new PCU has been installed. (Preinstalled PCUs do
not include this mechanism, and have two empty pins in their connector.)
Replacement PCUs are shipped with this mechanism. Slight rotation of PCU gear
at power-on releases plate, breaking the circuit and informing the FCU
that the new PCU is a replacement unit.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
Comment