replace new drum with old drum failed in 2035

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • akbareshghi
    Trusted Tech
    • Sep 2010
    • 261
    #1

    [Misc] replace new drum with old drum failed in 2035

    my old drum go to out of service and i decided to buy one new drum after replace this new drum and running 3001 for ID senser initialization for new drum , all of my drum become dirty with tuner .
    but after that i put old drum and all thing work well except the crash on the surface of old drum (the problem of dirty tuner after 3001 not exist for old drum)
    i questioned from seller of drum and he answered me ( many drum is not compatible )
    perhapse following caused creating this problem:
    1- setting drum at not correct position.
    2- label on the packing of new drum( for use in aficio 350/450 No. J159800631)
    if anybody have any idea about this problem please introduce for all technicians to overcome this problem.
    thank you for attempts
    Color printing with lowest cost per page is my love.
    Tags: 350, aficio, clo, cloth, dirty, drum, id sensor, old drum, service, set, setting, tech, technicians, work
    • rsyarcia
      Hair Straightener Tech

      500+ Posts
      • Feb 2008
      • 711
      #2
      check if that duplicate drum maybe it is not compatible with your model. most of the time they are including all models that is compatible on the label. if you see aficio 2035 then it is possible.
      Nobody is perfect..

        Comment

        • Eric1968
          Service Manager

          1,000+ Posts
          • Jan 2009
          • 2458
          #3
          The part no. for the 2045 drum is A230 9510. I've never tried an AF350 drum in an AF2045. If the whole drum is covered with toner the charge roller isn't making good contact with the drum.

            Comment

            • ibrahim
              Junior Member
              • Mar 2011
              • 6
              #4
              you can setting drum of af 350 chick position of drum ,id sensor,td sensor

                Comment

                • TonerMunkeh
                  Professional Moron

                  2,500+ Posts
                  • Apr 2008
                  • 3865
                  #5
                  Originally posted by Eric1968
                  The part no. for the 2045 drum is A230 9510. I've never tried an AF350 drum in an AF2045. If the whole drum is covered with toner the charge roller isn't making good contact with the drum.
                  The 350/450 drum is A230 9510 isn't it?
                  It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

                  Hit it.

                    Comment

                    • Ricohtechguy
                      Technician
                      • Apr 2011
                      • 11
                      #6
                      They are the same part number fro the drum. Did you clean the charge roller. If you don't replace the charge roller at least remove it and clean it with a damp cloth with water and then dry it.

                        Comment

                        • mikadonovan
                          Senior Tech

                          Site Contributor
                          2,500+ Posts
                          • May 2008
                          • 2931
                          #7
                          Originally posted by Eric1968
                          The part no. for the 2045 drum is A230 9510. I've never tried an AF350 drum in an AF2045. If the whole drum is covered with toner the charge roller isn't making good contact with the drum.
                          Eric has a good point. Check the spring terminals on either end of the roller. They become bent and don't make good contact.
                          NEVER ASSUME ANYTHING

                            Comment

                            Previous template Next
                            Working...