Ricoh 3245 deleting larger print jobs

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • victor25
    Technician

    50+ Posts
    • Dec 2009
    • 51
    #1

    Ricoh 3245 deleting larger print jobs

    Why would a Ricoh 3245c reject large print jobs. It will print small jobs just fine, but deletes the lagrger ones. None of my other machines do this, but on this one particular machine, if the job is a larger color print file, you can see the light flash a couple times and then just stops. It acts just like as if the user codes were enabled, but they are not. Any suggestions???
    Tags: 3245, codes, color, file, job, light, ops, print, reject, ricoh, user
    • nmfaxman
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2008
      • 1702
      #2
      Is print driver queue set for raw or LPR?

      Should be LPR with queue name of lp.
      Raw sends the jobs to memory.
      LPR sends the job to the HDD and spools it.
      Why do they call it common sense?

      If it were common, wouldn't everyone have it?

        Comment

        • Jomama46
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Apr 2008
          • 2900
          #3
          Originally posted by nmfaxman
          Is print driver queue set for raw or LPR?

          Should be LPR with queue name of lp.
          Raw sends the jobs to memory.
          LPR sends the job to the HDD and spools it.
          Good info nmfaxman, I always wondered what the difference was. However, he has a color 3245 not a mono 3245
          sigpic
          You never realize how cheap a professional is until after you let an amateur do it.
          A+; Network +; PDI+

            Comment

            • victor25
              Technician

              50+ Posts
              • Dec 2009
              • 51
              #4
              Good question? I dont honestly know, I usually set the port up to lp. It ws set up on there server, and shared out to everyone. So if the initial server was set up raw, then everybody will have the same issues.. That could actually be it, I will check.

                Comment

                • techsass
                  Trusted Tech

                  Site Contributor
                  100+ Posts
                  • Dec 2010
                  • 248
                  #5
                  You can try increasing the I/O buffer. UT/Printer/Host(?) - Tab just right of system.

                    Comment

                    Previous template Next
                    Working...