[Misc] calibrating toner concentration supply to developer

[akbareshghi]

my machine toner supply is high and i want to lower the amount of toner supplied to copy originals
please guide me about best ways of lowering toner supply

my TD sensor go to failure and i set toner supply mode controlled by Image pixel count

thank you

[Gift]

We are no sidekicks here so it'll be great if you reveal some more informations about the model you are talking about.

Some general hints:

- image pixel count is only made for temporary use
- some machines can permanently lower the image density if you create black copies (without the tonerbottle/hopper) until you think it's OK and perform both TD sensor and ID sensor init afterwards - that, of course, requires a healthy TD sensopr and PM parts

Unfortunately that kind of adjusting doesn't work for some (mostly newer machines) like I have the same problem "vice verse" with the MP5000 series that does look very pale in the blacks. If I perform manual toner add plus TD sensor initialisation the black loos excellent but after a short while the process control brings the machine back to the initial density (or even below that^^)...