MPC2030 and NIP Test failure

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299
    #1

    [Misc] MPC2030 and NIP Test failure

    Anyone ever been able to execute the NIP test on a MPC2030?

    I've tried on two different machines and the result is the same: I press "Execute" and the machine doesn't do anything.

    Any tips?
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
    Tags: est, execute, ips, mpc, mpc2030, press, result, scratching, test, tips
    • cobiray
      Passing Duplication Xpert

      1,000+ Posts
      • Mar 2008
      • 1199
      #2
      Have you adjusted the pre idling time or stop time for the adjustment? Is there a problem you're trying to resolve or is this a curiosity itch you are scratching?
      the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
      Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
      Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

        Comment

        • mrwho
          Major Asshole!

          Site Contributor
          2,500+ Posts
          • Apr 2009
          • 4299
          #3
          Originally posted by cobiray
          Have you adjusted the pre idling time or stop time for the adjustment? Is there a problem you're trying to resolve or is this a curiosity itch you are scratching?
          A colleague of mine is trying to troubleshoot a quality problem with one of those MFPs and he's suspicious of the fuser. He tried the fuser NIP with the result I told above. Out of curiosity we tried on another different 2030 and the result is the same.

          The main reason of this thread is to know how to do the fuser NIP - I'm not following the original problem anymore, it probably is solved already. I just don't have an answer for this one, hence this thread.
          ' "But the salesman said . . ." The salesman's an asshole!'
          Mascan42

          'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
          Ibid

          I'm just an ex-tech lurking around and spreading disinformation!

            Comment

            • cobiray
              Passing Duplication Xpert

              1,000+ Posts
              • Mar 2008
              • 1199
              #4
              I haven't played with the adjustment before, but I noticed it was there. I haven't had the joy of rebuilding one of these fusers yet, so I haven't. No I feel a need to try it out...

              I'm only suspicious of fusers when they start hanging around my lady friend...
              the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
              Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
              Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

                Comment

                • teebee1234
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Jul 2008
                  • 1670
                  #5
                  I might be wrong, but try setting the value of sp1109-1 to 1>execute>then go into copy mode from service (don't exit service mode) and make a copy. I seem to recall an older model that this was the procedure.

                    Comment

                    Previous template Next
                    Working...