MPC2050 Tray 2 frequent jamming.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Vioksrall
    Technician

    50+ Posts
    • Sep 2010
    • 84
    #1

    [Jamming] MPC2050 Tray 2 frequent jamming.

    The tray 2 is loaded with A3 paper size. It frequently jammed at the registration rollers. I already replaced the feed and registration clutches but it occasionally jammed. Does anyone has the same problem as this? Pls help. Thanks
    Tags: feed, jamming, mpc, paper, registration, replaced, size, tray
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      What are the jam codes. TSB 030 does a good job of instructing on jam per code.
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • Vioksrall
          Technician

          50+ Posts
          • Sep 2010
          • 84
          #3
          jam code 03.

            Comment

            • Jomama46
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Apr 2008
              • 2900
              #4
              Paper not fed from tray 1. Replace 2 of D039-1166 and one D039-1164 for tray 1
              sigpic
              You never realize how cheap a professional is until after you let an amateur do it.
              A+; Network +; PDI+

                Comment

                Previous template Next
                Working...