Ricoh 2051 sc818 error code

[pcernicky]

hi all,

Can anyone help with error code SC 818 on this machine?

Thank you.

[teebee1234]

SC818 - Watchdog error
While the system program is
running, a bus hold or interrupt
program goes into an endless loop,
preventing any other programs from
executing.

Possible Cause

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals | The Internet's largest selection of manuals | Instant Downloads

Paul@justmanuals.com

[Herrmann]

First at all, rewrite all(!) Firmware, newest versions of course.
Second, exange RAM against known good one

[pcernicky]

First at all, rewrite all(!) Firmware, newest versions of course.
Second, exange RAM against known good one

Thank you for the reply.

Any chance you can send me the firmware and the procedure how to re-flash the copier.

Thank you.

[teebee1234]

Thank you for the reply.

Any chance you can send me the firmware and the procedure how to re-flash the copier.

Thank you.

The procedure you can find from Paul (2 posts up). The firmware you can get when you register at Tessa or Ricoh TSRC.

[pcernicky]

The procedure you can find from Paul (2 posts up). The firmware you can get when you register at Tessa or Ricoh TSRC.

It will take 24 hours to register. I need it as soon as possible, with the instructions please.

thank you.