If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need a tech document of Ricoh FT4422, it now has a E5 erro, Who can help me ? Thank !
hi.
Enter the SP mode
1. Open the rear cover
2. DIP SW 101-3 and 4 on, on the main board
3. blink 5 tp the operatıon panel
4. 99 # 1 push '.' and '#' key. 1 #
5. DIPSW 101 -3 and off
6. torn off the machine and turn on
Comment