RICOH Aficio 3035 problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hosennet
    Trusted Tech
    • Mar 2007
    • 145
    #1

    RICOH Aficio 3035 problem

    Display next message:

    1.Reboot after cardinsert
    ADC4a.net Card No:1/1

    2.Download Error E44
    Network Support Card No:1/1

    Any ideals thanks


    Best regards
    Tags: 3035, aficio, aficio 3035, download error, ricoh
    • Cipher
      It's not easy being green

      1,000+ Posts
      • May 2006
      • 1309
      #2
      E44 is a firmware update error for the controller module according to SM.

      If you are not trying to update the firmware just take the SD card out of slot 3.

      If you are, try selecting and updating just the 'Network Support' module on it's own.
      If that does not work it may mean one or more of your .fwu files are corrupted on the SD card.
      Re-download them from the website and try again.
      Last edited by Cipher; 12-23-2007, 12:35 PM.
      • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

      Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

        Comment

        • hosennet
          Trusted Tech
          • Mar 2007
          • 145
          #3
          Originally posted by DaZ
          E44 is a firmware update error for the controller module according to SM.

          If you are not trying to update the firmware just take the SD card out of slot 3.

          If you are, try selecting and updating just the 'Network Support' module on it's own.
          If that does not work it may mean one or more of your .fwu files are corrupted on the SD card.
          Re-download them from the website and try again.
          Thanks DaZ

          I Try again more time Same problem display on machine

          Regards

            Comment

            • Tonerbomb
              AutoMajical Resolutionist

              Site Contributor
              2,500+ Posts
              • Feb 2005
              • 2589
              #4
              format the sd card and load fresh files. also try to boot from the sd card, turn on sw 1 on controller with card in and power up.
              Mystic Crystal Revelations

                Comment

                • hosennet
                  Trusted Tech
                  • Mar 2007
                  • 145
                  #5
                  Originally posted by Tonerbomb
                  format the sd card and load fresh files. also try to boot from the sd card, turn on sw 1 on controller with card in and power up.
                  Thanks Tonerbomb
                  I try your ideal. Display SC672 on panel
                  Any ideals for me

                  Regards

                    Comment

                    Previous template Next
                    Working...