My fusing throw one line into the copies (2035)

[akbareshghi]

the line most often appeared and specially when the thickness or percent of toner is high, is appeared on the copies.
please guide me about replacing Hot roller and Grease which parts while replacing Hot roller.
the following parts:
2. C-rings x2 [B] (both ends)
3. Drive gear [C]
4. Bushing x2 [D] (both ends)
5. Pressure roller [E]
6. Fusing knob [F] ( x1)
7. Bushing x2 [G] (both ends)
Snap7.jpg

[TonerMunkeh]

Re: My fusing throw one line into the copies (2035)

You don't need to grease any parts, the worst that will happen is the fuser will click a bit. Just replace the roller. Have you not got a service manual? Replacement and adjustment tells you all this.

[JustManuals]

Re: My fusing throw one line into the copies (2035)

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com