MP9000 does not get READY

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • chucklima
    Junior Member
    • Dec 2010
    • 1
    #1

    MP9000 does not get READY

    I have a MP9000 that does not get on READY condition, everything seams okay but the print button has a red light, no service codes or any kind of message.
    Tags: button, codes, indigo, light, message, mp9000, print, read, ready, red, service
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      Re: MP9000 does not get READY

      Disconnect the finisher and ADF and any other accessories, try it again.
      Disconnect the HDD and try it again.
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9919
          #3
          Re: MP9000 does not get READY

          This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

          Paul@justmanuals.com

            Comment

            • iMind
              Vacuum Cleaning Expert

              1,000+ Posts
              • Mar 2008
              • 1116
              #4
              Re: MP9000 does not get READY

              Open back left power supply door, 2 screws, there are two power supply boards replace right board,thats a known fault.
              sigpicWe can all Win, but at the end we all loose. Save the greyhound

                Comment

                Previous template Next
                Working...