Enhanced Locked Print NX - error J522

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fatale80
    Technician
    • Jun 2009
    • 10
    #1

    Enhanced Locked Print NX - error J522

    Hi guys,
    I'm just trying to install ELP NX embedded on MPC3001 for testing purposes and i'm getting error J522 everytime i try to run the app. any suggestions?
    Do i need some trial license ?

    thanks!
    Tags: app, elp nx, error, everytime, install, license, locked, mpc, print, run, stall
    • Choro1dal
      Trusted Tech

      100+ Posts
      • Jun 2008
      • 176
      #2
      Re: Enhanced Locked Print NX - error J522

      J522 is a licencing issue. You'll need to Activate and Store a license on the device with use of the Remote Manager.

        Comment

        • MOSSY BOY
          Technician
          • Aug 2010
          • 16
          #3
          Re: Enhanced Locked Print NX - error J522

          Hi,

          Have you done what Choro1dal suggests?,

          If you have installed and stored the licence using remote Manager there should be no issue.

          I have found that if you try to start ELPNX you get that error when in Extended features.

          Try reebooting the device, 99% of the time ELPNX will then start.

          You really need to make sure that the licence is installed and stored.

          Also try deactivate, unistall, reinstall, store etc for ELPNX app and licence.

          These apps can be tempremental.

            Comment

            Previous template Next
            Working...