If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
When it is in sleep mode ...it wont wake up to receive a incoming fax....and the reason is ?
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
we do have your manual but it is not in there.. this calls for the big guns!!!
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
Have you checked the SMC and see if there are any service codes logged? I had an issue with a machine where it would go into energy saver and will not print or recieve faxes. It had a few service codes that did not show up on the screen. SMC recoreded some codes relating to energy saver mode. Had to replace the controller.
After having another think about this one, has the machine been moved or the cable been changed? If you plug a phone into the socket and dial the fax number, does it ring? Could be the line's not being supplied the correct voltage for the machine to notice it's receiving something. Does it receive faxes okay when it's awake?
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Comment