Sub-scan magnification on MPC2000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • limo
    Trusted Tech

    100+ Posts
    • Jun 2008
    • 103
    #1

    Sub-scan magnification on MPC2000

    I cant find anything in the service manual about the sub-scan magnification adjustment.
    Anyone knows how to do it?
    I know it is done automatically with line position adjustment but we need to it manually.

    Any ideas?
    Tags: adjustment, automatically, line, manual, mpc, position, sca, scan, service, service manual
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2458
      #2
      Re: Sub-scan magnification on MPC2000

      Don't know for sure if you can do it manually, but I think the machine will "correct" the values when it is going to perform the line positioning adjustment.What is the problem with the machine?

        Comment

        • Jomama46
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Apr 2008
          • 2900
          #3
          Re: Sub-scan magnification on MPC2000

          sp4008 changes the sub scan mag by changing the scan motor speed
          sigpic
          You never realize how cheap a professional is until after you let an amateur do it.
          A+; Network +; PDI+

            Comment

            • limo
              Trusted Tech

              100+ Posts
              • Jun 2008
              • 103
              #4
              Re: Sub-scan magnification on MPC2000

              Sorry, i need to clarify my problem is with printing sub-scan.
              The problem is that the magnification is not correct when printing,only in the sub-scan direction.
              I know is something with laser writing for black but i cant find what.
              REGARDS

                Comment

                Previous template Next
                Working...