[Error Code] Savin 8090 SC725 (stapler problem)

[Dr.silver]

I have been dealing with a Savin 8090 it has been throwing sc725 code for the last 2 months. I rest the machine and right off the bat I get a R jam, Open up the finisher door close it and get the SC725. So I did some research and read that this code was a board problem and the fix was too get a new board and swap out the old one. I did that the same thing happen. I have clean the finisher multiple times and had the machine running for a bit. Now there is a consistence SC725. The Jam code 115.

Anyone out there with Fixes or had this problem Love too hear from ya.

[jonhiker]

Re: Savin 8090 SC725 (stapler problem)

Try replacing the staple cartridge(not just the refill, but the whole cartridge), or the stapler.

[TonerMunkeh]

Re: Savin 8090 SC725 (stapler problem)

Sounds like the finisher stack feed out belt HP sensor has either come adrift or is broken / dead. A missing exit pawl on the belt can cause this too, there's two and if the machine doesn't get two sensor activiations when it's running the belt, this will cause a jam. The sensor lives on the back of the guts of the finisher.

[Dr.silver]

Re: Savin 8090 SC725 (stapler problem)

I am going too order the Stapler and try that. I will KYIF