Dip Switchs Funtion

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hosennet
    Trusted Tech
    • Mar 2007
    • 145
    #1

    Dip Switchs Funtion

    Dip Switches
    Controller Board
    DIP SW No.
    OFF ON
    1 Boot-up from FlashMemory Boot-up from SD card

    2 to 8
    Factory Use Only: Do not change the switch settings.

    BICU Board
    DIP SW No.
    OFF ON
    1 and 2
    Factory Use Only: Do not change the switch settings.

    Somebody help me about setting of the controller board DIP 2 TO 8 and BICU BOARD DIP 1 TO 2 function for MPC 2500

    Regards
    Last edited by hosennet; 01-17-2008, 06:23 PM.
    Tags: switchs
    • galexander37
      Technician
      • May 2007
      • 16
      #2
      Dip switch

      g

        Comment

        • Cipher
          It's not easy being green

          1,000+ Posts
          • May 2006
          • 1309
          #3
          The standard procedure when you replace a PCB is to jott down or make sure the new PCB dip switches mirror that of the old board you are replacing.

          The service manual will not explain anything thats done at a factory level.
          • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

          Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

            Comment

            Previous template Next
            Working...