SC 819 MP4000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • katash
    Trusted Tech
    • May 2010
    • 221
    #1

    SC 819 MP4000

    hi guys,the last time i had this had to replace the controller as was not able to upgrade the firmware,
    is there another way of dealing with this prob!the part is damn costly!!help!!!
    Tags: 819, controller, firmware, help, mp4000, part, replace, roller, time, upgrade
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2458
      #2
      Re: SC 819 MP4000

      Remove all options to see if one of them is defective. Try to reload the controller firmware. If that doesn't work I'm afraid you'll have to replace the controller.

        Comment

        • zed255
          How'd ya manage that?

          1,000+ Posts
          • Dec 2009
          • 1024
          #3
          Re: SC 819 MP4000

          I've seen bad RAM and corrupted HDDs cause an SC819, but it usually is the controller at fault (or the firmware, but by the time the SC appears it's too late).

            Comment

            • katash
              Trusted Tech
              • May 2010
              • 221
              #4
              Re: SC 819 MP4000

              thanks guys for your responce seems have to replace the controller it has no hdd or options.

                Comment

                Previous template Next
                Working...