If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a ricoh mpc2800 showing load cyan toner cartridge message. The toner pump and drum have been replaced but has not cured the issue. Can anyone please advise?
Try replacing the developer if it's over life. If not, you'll probably need to replace the entire dev unit. Also check out TSB #018 for that model. There are part number changes for the pumps and a flow chart for troubleshooting.
the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window. Michael Bolton: You and me both, man. That thing is lucky I'm not armed.
I assume you have changed the toner bottle as well after having problems with toner pump? Is toner coming down with "forced toner"? - else take off hose on back of toner bottle and vacuum from both ends, I have had a few machines where this happended as well as bad toner pump.
Comment