sc990

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gansathya
    Technician
    • Jul 2010
    • 45

    #1

    [Error Code] sc990

    Dear friends,

    i had ricoh 2090 now its appear error code sc990,
    when we take the back to back prints only its apper what i need to do. kindly help me please
  • vargue
    Trusted Tech

    250+ Posts
    • Oct 2011
    • 404

    #2
    QUEST

    look my friend i need more info about this thread like this code revealed with opening machine or during copying process second question this image is faint or blurred or contrast is good please more details

    Comment

    • gansathya
      Technician
      • Jul 2010
      • 45

      #3
      Re: sc990

      hi vargue,

      its not come in copying process, its come only when we give back to back prints, single side print dosen't had problem, and copy and print quality also good.

      Comment

      • vargue
        Trusted Tech

        250+ Posts
        • Oct 2011
        • 404

        #4
        Re: sc990

        look my friend if image faint or blurred replace drum cause 990 and check out toner hose and coil that be certain that toner validity if yo use bad toner make stuff or staking up in glasses also but that is last assume software problem but rarely do that machine this trouble ...

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838

          #5
          Re: sc990

          This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads - Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

          Comment

          • vargue
            Trusted Tech

            250+ Posts
            • Oct 2011
            • 404

            #6
            Re: sc990

            no my dear this info not written in service manual or any way no reference in book no reference in any where else this info acquiring by experience service manual write alot of threads only thanks

            Comment

            • Ronan
              Technician

              50+ Posts
              • Aug 2011
              • 55

              #7
              Re: sc990

              Hey, look at the hard disk, try to change it, I have had problems in these models with hard disk and I have marked the SC, luck

              Comment

              • dv007833
                Technician
                • Aug 2008
                • 43

                #8
                Re: sc990

                Hi, i have the same problem on an aficio 1075. But it only happens when I install the printer/scanner dimm. Any ideas?

                Comment

                • luke001
                  Technician
                  • Dec 2011
                  • 46

                  #9
                  Re: sc990

                  If multiple confidential document storing jobs are executed one after another while a printing job is going on, the SC990 printer error occurs.
                  Upgrade the printer software to B5806515A (ver. 1.20) or later
                  SC990
                  (Software Performance Error 1) appeared when a document of more than 120 pages was printed from the document server with chapter sheets inserted.
                  This error occurred with documents that exceeded 103 sheets.
                  GW Controller Ver. 5.05....
                  1. upgrade all firmware
                  2. check HDD,memory, GW controller.

                  Comment

                  • turgayturkey
                    Junior Member
                    • Jan 2009
                    • 5

                    #10
                    Re: sc990

                    Sp 2210. 10 change 0

                    Comment

                    Working...