[Misc] mpc 2030 no display

[eurokris]

hi all

mpc 2030 no display only have green light at panel.i check in controller pcb and bicu .all have light flash.

pls help me .urgent

thanks

[Oze]

Re: mpc 2030 no display

Does the machine come to a ready state?
Are you able to use the op panel keypad to operate the machine?
If so it sounds like a blown inverter board.

[eurokris]

Re: mpc 2030 no display

hi

now display light got .after 20min come code sc828.

pls anyone help me.

thanks

[sharpmind]

Re: mpc 2030 no display

Is the firmware updated?

[vargue]

Re: answer

yea check that firm ware updated

[scapin]

Re: mpc 2030 no display

More than likely the touch screen has failed this is common.

Part No: B223-9900

Ricoh know of this problem..

[teebee1234]

Re: mpc 2030 no display

That's a ROM error (nothing to do with the touchscreen). You can try and do the firmware, but chances are you will have to replace the controller board.