Remove Fiery from Infotec ISC4045

[liokin]

Hello,

Do you have a procedure to remove completely a Fiery from a Infotec ISC4045 (same as Ricoh MPC 4045) ?

Thanks a lot,

Thierry

[TonerMunkeh]

Re: Remove Fiery from Infotec ISC4045

I assume you mean the MPC4500. Basically just reverse the installation procedure in the Fiery service manual.

[liokin]

Re: Remove Fiery from Infotec ISC4045

I assume you mean the MPC4500. Basically just reverse the installation procedure in the Fiery service manual.

I dont have the installation procedure...

[TonerMunkeh]

Re: Remove Fiery from Infotec ISC4045

Ah. Here you go then!

E5000 Fiery Installation.pdf

[liokin]

Re: Remove Fiery from Infotec ISC4045

Ok.

Any idea where to buy the removed memory and the SD card ?

T/.

[slot]

Re: Remove Fiery from Infotec ISC4045

did this on an mpc4500 afew weeks ago works great remember you will need to add the memory to the controller
we used a scrap machine for our parts

[liokin]

Re: Remove Fiery from Infotec ISC4045

did this on an mpc4500 afew weeks ago works great remember you will need to add the memory to the controller
we used a scrap machine for our parts

Anyone who have those parts ?

T/.