problem scanner smb-ftp configuration 2018d

[avio2]

hi i have a problem whit configure scan to ftp and smb because in wim and in panel mfp i not have configuration forder but only scan to email
i have read a guide to "scan to folder white paper" but i not have a button for folder I have to set something on the mfp?

thanks

[sandmanmac]

Re: problem scanner smb-ftp configuration 2018d

hi i have a problem whit configure scan to ftp and smb because in wim and in panel mfp i not have configuration forder but only scan to email
i have read a guide to "scan to folder white paper" but i not have a button for folder I have to set something on the mfp?

thanks

SMB/FTP is not available on this older model.
You need Scanrouter V2 Lite software which is antiquated, hard to find, and difficult to impossible to setup, if you're not familiar with it. You would also need to turn 'on' the "Delivery option" if you were going to use scanrouter:

- User tools
- System Settings
- Interface settings
- File transfer

Without the 'hands on' of someone familiar with the software, I'd recommend just sticking to Scan to email on this one

[avio2]

Re: problem scanner smb-ftp configuration 2018d

SMB/FTP is not available on this older model.
You need Scanrouter V2 Lite software which is antiquated, hard to find, and difficult to impossible to setup, if you're not familiar with it. You would also need to turn 'on' the "Delivery option" if you were going to use scanrouter:

- User tools
- System Settings
- Interface settings
- File transfer

Without the 'hands on' of someone familiar with the software, I'd recommend just sticking to Scan to email on this one

really nice andearly, I thank you,I really hadthis suspicion I'll try to look for scanrouter

[teebee1234]

Re: problem scanner smb-ftp configuration 2018d

If you decide to take the plunge with Scanrouter, be aware it was only supported up to XP and Server2003. If the environment you want to install it in is newer then it would be best to get an unneeded PC and load XP on it. Use that as your file server on the network with Scanrouter loaded on it.

[sandmanmac]

Re: problem scanner smb-ftp configuration 2018d

If you decide to take the plunge with Scanrouter, be aware it was only supported up to XP and Server2003. If the environment you want to install it in is newer then it would be best to get an unneeded PC and load XP on it. Use that as your file server on the network with Scanrouter loaded on it.

Although, as I've posted before, I've set it up multiple times on Windows 7, Server 2008 R2,Etc. (including 64 Bit), just disable UAC on the OS, and manually start the "Delivery Service" after the initial system re-boot, and it works perfectly.