SC.819 for Riccoh MP5000B

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Waliul
    Technician
    • Jul 2010
    • 20
    #1

    [Error Code] SC.819 for Riccoh MP5000B

    I have a problem on my RICOH MP5000B there is message on display SC.819. I already checked and found Controller Board is defective. But it is costly for customer. Can someone help me how can i reset these trouble code.
    Tags: code, controller, customer, display, message, reset, ricoh, roller, trouble
    • sharpmind
      Trusted Tech

      250+ Posts
      • Sep 2009
      • 478
      #2
      Re: SC.819 for Riccoh MP5000B

      The only thing you can do is to replace it. No other solution but to change the controller board.

        Comment

        • barratec
          Trusted Tech

          100+ Posts
          • Jun 2008
          • 162
          #3
          Re: SC.819 for Riccoh MP5000B

          SHARPMIND is right! probably the customer used turned off the machine not following the correct procedure causing the control board fault

            Comment

            Previous template Next
            Working...