savin 9220 flashing 1 in display and auto density flashing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • asharpguy
    • May 2025
    #1

    [Misc] savin 9220 flashing 1 in display and auto density flashing

    I'm a sharp guy by trade, and don't know much about Savins. I'm trying to work on one that a few months after replacing the drum, the auto density and 1 started flashing. I'm not sure if this is some kind of reset. He says machine is working ok, just never had the lights flashing before. thanks for any input.
    Tags: 220, auto, display, drum, flashing, reset, savin, sharp, work
    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900
      #2
      Re: savin 9220 flashing 1 in display and auto density flashing

      Calling for a PM
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

        Comment

        • asharpguy
          #3
          reset

          How can I reset this?

            Comment

            • sandmanmac
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Feb 2009
              • 3973
              #4
              Re: reset

              Originally posted by asharpguy
              How can I reset this?
              PM counter clear: Service mode 7-804

                Comment

                Previous template Next
                Working...