SC672

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Geeaer
    • May 2025
    #1

    SC672

    I have morfed from Canon to Ricoh and have noticed that I have a number of copiers coming up with a SC672. Is that a code that I will be seeing a lot of or is their some preventative measures I can take?
    Tags: canon, code, copiers, measures, number, preventative, ricoh, sc672, scanner
    • RICOHMAN
      #2
      Re: SC672

      Hi the sc code 672 could be your hard disk or main controller try unplugging hard disk and check for loose connections on scanner harness it would help if you tell us what model it was
      hope this help you

        Comment

        • Geeaer
          #3
          Re: SC672

          The code was found on several models mp4001, MP3351, MP2851. One machine required a Hard Drive, One machine required a controller board. and the third I have not been to yet. My question is, is this a code that occurs a lot? If the is, I will start stocking hard drives and controller boards.

          Thanks for your response.

            Comment

            • Iowatech
              Not a service manager

              2,500+ Posts
              • Dec 2009
              • 3930
              #4
              Re: SC672

              Might not be a bad idea to keep a few hard drives back at the shop if you're not the only Ricoh tech. We don't see that error too often, but it does seem to happen to happen to multiple machines when it does occur.

                Comment

                • Geeaer
                  #5
                  Re: SC672

                  Thanks

                    Comment

                    Previous template Next
                    Working...