MPC4500 - SC549?

[CableGuy]

Re: MPC4500 - SC549?

It's been a couple years, but wasn't there a bulletin on this problem and it turned out to be the two sensors aw02 0020 ( modded to aw02 0190) the flag on the ferrite roller would knock them out of position.....
God, some of you guys seem to have a fascination with swapping out boards at the drop of a hat....

[repairtech91691]

Re: MPC4500 - SC549?

I'm chasing this same problem, motor checks out , both sensors read correctly, no binding in fuser

[Andrii]

Re: MPC4500 - SC549?

If machine equipped with finisher, check Left & Right Guide Switch in Bridge Unit.