unable to browse the network (MP8000)

[sharpmind]

Guys, is there any setting I have missed why I can't find the list of computers in the network by browsing it through the machine?Domain name is already entered as well as the DNS.Any ideas? Thank you.

[Jomama46]

Re: unable to browse the network (MP8000)

If you are browsing to a W7 or 2008 server you may need a firmware upgrade

[vargue]

Re: unable to browse the network (MP8000)

i meet this problem reset machine 5801-11 and try to browse it's works definitely...

[sharpmind]

Re: unable to browse the network (MP8000)

i meet this problem reset machine 5801-11 and try to browse it's works definitely...

Had tried SP5801-11 (NCS) but still unable to browse the network.

[Ronan]

Re: unable to browse the network (MP8000)

I've had this problem on several machines and upgrading the firmware fix. good luck

[sharpmind]

Re: unable to browse the network (MP8000)

I've had this problem on several machines and upgrading the firmware fix. good luck

I also have observed that upon changing the domain name into WORKGROUP, I was able to browse the network. After a couple of minutes I again browsed the network and the same problem occurred. Firmware upgrade would be my next step in solving this issue.