Well when you mentioned UAC I thought that we may have somthing there. I turned it off but it did not help. Yes, you are right, this computer is not in a domain. In fact it is a laptop we have in the office. We exprienced this problem in the field on the same os at a custamers location. Then we tried it in the office. Same problem. It does seem to have somthing to do with Authintication. I just dont know where. Like I said, all other computers in the network under XP or 2000 have no trouble but when you try to send it to this Vista machine, forget it. I have seen some bullitens about SMB being upgraded due to a security breach but no one has come up with a fix for this case. I think you for spending time on this posting. Im just sure there has been someone out there with this same problem.
-
-
Some MFP's need a firmware upgrade to scan to a Vista shared folder.Information is intended for certified service personnel only. Your mileage may vary, see dealer for details.Comment
-
Yeah many times firmware solves all kinds of wierd problems. Sometimes I think it's not even from the update itself but rather from just overwriting the old one to give it that little kick in the butt.Peace sells, but who's buying?Comment
-
Thank you everyone for all your ideas. The firmware did the trick. As soon as I looked at the readme on the firmware NIB V.418 I knew this was it. This firmware for the DSC428 resolved the issue of not being able to scan back to vista machines. Thanks again for all your help.
Sorry if I offended you cmpelser, honestly I didnt even see that page. Wish I had, it would have saved me a lot of trouble. Plus eveyone here wanted to insist it was not the copier.
Comment
-
Problem Fixed
Thanks everyone for all your help. The firmware upgrade did the trick.Comment
Comment