MP2050 PF one-ways

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jomama46
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Apr 2008
    • 2900
    #1

    MP2050 PF one-ways

    I have to replace the one-ways on the 2nd paper feed station. I can see the PF motor mounted on a bracket. Please tell me I dont have to take that whole bracket out from the back. I cant even see the screws!
    and by the way if it were the 1st feed station, it looks like you would have to pull that controller box too.
    I am getting too old for this.
    sigpic
    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+
    Tags: None
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: MP2050 PF one-ways

      Yes, you do have to take the bracket off. It's only 3 screws tho. And yes, if you wanted to get at feed station 1, it's controller board off.
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • Jomama46
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Apr 2008
          • 2900
          #3
          Re: MP2050 PF one-ways

          Thanks TM, I was afraid of that.
          sigpic
          You never realize how cheap a professional is until after you let an amateur do it.
          A+; Network +; PDI+

            Comment

            Previous template Next
            Working...