MPC 3500 sc 581

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rick
    Trusted Tech
    • Mar 2007
    • 277

    #1

    MPC 3500 sc 581

    This unit is on its second fuser and now I am getting a sc 581 does any one know what the fix is for this also how do I initialize the hard drives in this unit.
  • Eric1968
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2458

    #2
    Re: MPC 3500 sc 581

    Check CN981 on the IH Inverter or replace the IH Inverter. SP5-832 is for HDD Initialization.

    Comment

    • rsyarcia
      Hair Straightener Tech

      500+ Posts
      • Feb 2008
      • 711

      #3
      Re: MPC 3500 sc 581

      visually check the thermostat on the IH inverter.
      Nobody is perfect..

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        Re: MPC 3500 sc 581

        This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

        Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

        Paul@justmanuals.com

        Comment

        • Rick
          Trusted Tech
          • Mar 2007
          • 277

          #5
          Re: MPC 3500 sc 581

          Originally posted by Eric1968
          Check CN981 on the IH Inverter or replace the IH Inverter. SP5-832 is for HDD Initialization.
          Is this thermostat right on the fuser unit

          Comment

          • Eric1968
            Service Manager

            1,000+ Posts
            • Jan 2009
            • 2458

            #6
            Re: MPC 3500 sc 581

            The IH Inverter is controlling the IH Coil Unit. SC581 means that the inverter detects an abnormal voltage. The IH Inverter is located behind the right-rear cover.

            Comment

            • NeoMatrix
              Senior Tech.

              2,500+ Posts
              • Nov 2010
              • 3513

              #7
              Re: MPC 3500 sc 581

              Check the IH inductive Heater Coil thermostats(button) are not tripped or depressed inward.
              Inauguration to the "AI cancel-culture" fraternity 1997...
              •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

              Comment

              • rsyarcia
                Hair Straightener Tech

                500+ Posts
                • Feb 2008
                • 711

                #8
                Re: MPC 3500 sc 581

                Originally posted by Rick
                Is this thermostat right on the fuser unit
                We have the problem and it was the thermostat on the IH inverter. Before removing the IH inverter(little bit hard) you can check the continuity of the thermostat through the IH board- CN983.
                Nobody is perfect..

                Comment

                • Rick
                  Trusted Tech
                  • Mar 2007
                  • 277

                  #9
                  Re: MPC 3500 sc 581

                  Originally posted by rsyarcia
                  We have the problem and it was the thermostat on the IH inverter. Before removing the IH inverter(little bit hard) you can check the continuity of the thermostat through the IH board- CN983.
                  I cant seem to find this IH board . Is it the one behind the main power supply ?

                  Comment

                  • mikadonovan
                    Senior Tech

                    Site Contributor
                    2,500+ Posts
                    • May 2008
                    • 2931

                    #10
                    Re: MPC 3500 sc 581

                    If your standing on the right side of the machine looking at the bypass, take off the cover to the right of it. The IH coil PS is there.
                    NEVER ASSUME ANYTHING

                    Comment

                    • rsyarcia
                      Hair Straightener Tech

                      500+ Posts
                      • Feb 2008
                      • 711

                      #11
                      Re: MPC 3500 sc 581

                      Originally posted by Rick
                      I cant seem to find this IH board . Is it the one behind the main power supply ?
                      Use the Service Manual...
                      Nobody is perfect..

                      Comment

                      • mikadonovan
                        Senior Tech

                        Site Contributor
                        2,500+ Posts
                        • May 2008
                        • 2931

                        #12
                        Re: MPC 3500 sc 581

                        Originally posted by rsyarcia
                        Use the Service Manual...
                        That does seem to help
                        NEVER ASSUME ANYTHING

                        Comment

                        • Eric1968
                          Service Manager

                          1,000+ Posts
                          • Jan 2009
                          • 2458

                          #13
                          Re: MPC 3500 sc 581

                          The IH Coil Unit is behind the Fusing Unit. This Unit heats the Fusing Belt. The IH Inverter is located behind the Right-Rear-Cover. If you still can't find it then ask Paul for the service manual.

                          Comment

                          • Belmont Turbo
                            Technician
                            • Dec 2009
                            • 11

                            #14
                            Re: MPC 3500 sc 581

                            Hi all im having the same problem sc581 we have changed the ih board, ih coil, the power supply board the fusing unit and its back in again today with sc581! any one got any idears because its driving me mad now. Have spoken to ricoh they said to change ih board then power supply done that and it lasts a day then sc581 again!!

                            HELP

                            Comment

                            • Belmont Turbo
                              Technician
                              • Dec 2009
                              • 11

                              #15
                              Re: MPC 3500 sc 581

                              we have also put latest firmware on also

                              Comment

                              Working...