Got a Ricoh Pro C900 with an error code of SC 476 can anyone help me out.
-
-
Re: Ricoh Pro C900 SC 476 error code.
Image transfer belt overrun sensor (rear) - these can become sticky as they are above the fuser - to clear the error physically move the belt towards the front of the machine away from the sensor
line up with black lines on bed of ITB ass'y make sure all rollers are clean and located correctly it is ok to turn the belt around to see if that helps
good luck
eosis -
Re: Ricoh Pro C900 SC 476 error code.
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comComment
Comment