Ricoh MPC 7500 J001 with no signs where to remove paper

[Besserwisser]

Re: Ricoh MPC 7500 J001 with no signs where to remove paper

Hi
Had a simular problem last year and had to remove the power supply..strange, but it helped...try first with a used one....they are not cheap..

[Timmytronic]

Hiya

I have a Ricoh MPC 7500 J001 with no signs where to remove paper.

I have changed the door switches, both sets, updated the firmware, swapped the duplex unit, and whole transport section with the fuser unit in it from another machine.

When I open the door the message does not disapear and door open does not show but the lights on the Printer/Scanner go off and on with the door so it knows the door is opening. Drastically reset the memory and still no joy. Reset the SC and swithched the machine off and on several times and at the plug.

Starts up straight away after a few whirs saying J001, Paper Misfeed, please remove paper from the following points, showing the copier but nothing is high lighted just a picture of the machine with blue lines on it. Disconnected the ADF and Sorter as well.

Never had this. Any help would be FAB as I am lost and knackard after hours of looking.

Tim