DSc 424

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • staffie man
    Technician

    50+ Posts
    • Aug 2011
    • 59

    #1

    [Misc] DSc 424

    Hi Guys.
    The magenta dev unit on this m/c makes a loud rumbling noise & feels tight on the frame when pushed in manually,it also spills out a lot of yellow toner mainly towards the front of the m/c, i have replaced the magenta dev unit & clutch but no joy the yellow dev has done 53k so i would appreciate some input before ordering more parts. Thanks in advance
  • Jomama46
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Apr 2008
    • 2900

    #2
    Re: DSc 424

    Heres some input, Output it out the door.
    sigpic
    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+

    Comment

    • Herrmann
      Senior Tech

      Site Contributor
      500+ Posts
      • Jan 2006
      • 792

      #3
      Re: DSc 424

      Output it out the door
      Very wise words, and in addition, sink it into the deepest pit availible at your location
      If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        Re: DSc 424

        This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

        Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

        Paul@justmanuals.com

        Comment

        • TonerMunkeh
          Professional Moron

          2,500+ Posts
          • Apr 2008
          • 3865

          #5
          Re: DSc 424

          Originally posted by manuals4you
          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

          Paul@justmanuals.com
          Aaw Paul, why didn't you add to the smart quips about how shite these machines are?

          Here's mine - The Model-U's designer should be disembowled in front of all the engineers that were unlucky enough to be within 500 metres of one of these god awful pieces of shit, never mind fixing one. As for the "individual" who deemed it necessary to put them out as recycled machines, there's a special place in hell reserved just for you pal.

          Back on topic - before you spend any more money on this thing, do you not have a machine you can swap it for. It'll cost you a damn sight less in the long run and parts will eventually become harder to get.
          It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

          Hit it.

          Comment

          Working...