If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
your opinion, witch is the best ricoh colour MP machine?
Re: your opinion, witch is the best ricoh colour MP machine?
Only the bypass is rated to use 300g and the trays max out 256g on the MPC range.
I doubt they were designed to be used continuously on those thick card stocks though.
Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
Re: your opinion, witch is the best ricoh colour MP machine?
Agreed. Running thick stock through this thing's fuser will pretty much make it eat itself, especially now they've not got an oil supply roller anymore.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Re: your opinion, witch is the best ricoh colour MP machine?
I've got a print shop with a MPC 4501 installed that seems to work pretty good. This model was designed to run heavier stock. Get on ricoh usa to check the specifics on the recommended paper weights for the machine. Oh yeah. and it's considerably less expensive than the Pro series!
Comment