Equitrac and virtual port issue

[ferastec]

Hi guys

I had a problem while configuring equitrac with virtual port(E-Queue), the issue that at the client PC it takes long time to open the print windows and even in the print server to open the printer properties it taks a while.
If i will switch the same printer driver to normal EQ port, then every thing will work perfect.

Kindly advice.

[gds64]

Re: Equitrac and virtual port issue

Hi guys

I had a problem while configuring equitrac with virtual port(E-Queue), the issue that at the client PC it takes long time to open the print windows and even in the print server to open the printer properties it taks a while.
If i will switch the same printer driver to normal EQ port, then every thing will work perfect.

Kindly advice.

It may be the driver trying to "auto update" to a device that doesn't physically exist (the virtual printer). Switch the option off in the driver properties > accessories tab.

[ferastec]

Re: Equitrac and virtual port issue

i was thinking about it,,,, i will try that tomorrow. thanks