Aficio 3235C development unit is not set properly...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hossam
    Technician
    • Aug 2010
    • 70
    #1

    Aficio 3235C development unit is not set properly...

    i have a problem with aficio 3235C when switch the power on this message appears

    development unit is not set properly: yellow

    help please, thx
    Tags: color machine, ricoh 3235c
    • Saviour
      Technician

      50+ Posts
      • Oct 2008
      • 57
      #2
      Re: Aficio 3235C development unit is not set properly...

      Most of the times its just removal and replacing of the unit. But if it persists first I would insert the old unit and then make sure that you the new developer is the right one as the ones for AF3224 nearly fir but will give that error
      Voluntary assistance can be your greatest gift once you do not degrade the recipient.

        Comment

        • Gift
          Service Manager

          1,000+ Posts
          • Mar 2011
          • 2444
          #3
          Re: Aficio 3235C development unit is not set properly...

          Sometimes the development units have too much play so they move away from the drive. It's also possible that the dev clutch or the dev unit itself is broken of course.

            Comment

            • sandmanmac
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Feb 2009
              • 3964
              #4
              Re: Aficio 3235C development unit is not set properly...

              I've had one recently where I had to run the "new unit set" SP.
              Open front cover, perform SP5-999-6 (yellow). Close cover.
              It's certainly the easiest first thing to try before replacing clutches, connectors, etc. (like i did before doing this)

                Comment

                Previous template Next
                Working...