PROTOCOL DUMP T30 need help

[RICOHTEC]

HI
i have a problme with an MPC2800.When a try to send a faxe the communication is broken after a few moment . I print the protocol dump But i could not analyse the informations .
So I am in research an document which explains the protocol T30 .

thanks



sorry for my bad english

[teebee1234]

Re: PROTOCOL DUMP T30 need help

In Fax Service Mode, go to SP6-102 (Service Monitor Report) and select "On". This will print out all of the specific error codes, which you can cross reference to the attached list I pulled from the manual.

[RICOHTEC]

Re: PROTOCOL DUMP T30 need help

In Fax Service Mode, go to SP6-102 (Service Monitor Report) and select "On". This will print out all of the specific error codes, which you can cross reference to the attached list I pulled from the manual.

thanks for your answer. But a don't when error codes but a want a document whichexplains how to analyse a protocol dump T30 .