MPC 2000 No Start-up, just shows IP and Please Wiat

[Voltage]

Hi

I have a MPC2000 freezes on start-up. It just displays its IP Address and underneath Please Wait. I have disconnected the HD but no luck. Replacing the the Printer Controller solved the problem, but still i need to fix the faulty one.

Any ideas??

Thx

[Jomama46]

Re: MPC 2000 No Start-up, just shows IP and Please Wiat

The controller board is defective, send it out for repair. It is nothing you can do if you dont have the equipment