Ricoh Mp4000 (Df 3010)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gesttech
    Trusted Tech
    • Oct 2009
    • 123

    #1

    Ricoh Mp4000 (Df 3010)

    Hi All

    My problem was on ARDF Df3010. Paper jam alway occurs when doing copy on ARDF. I replaced photo interuptor paper exit/registation sensor.
    when check on sp mode, on ADRF freerun mode paper jam always occurs when set paper to ARDF. Check on ARDF simple/Duplex mode problem still occurs.On ADRF stamp mode it ok, but for seconde pages paper jam Occurs. What to do? Please. Paper jam inbetween the exit sensor.(Middle)

    Thanks....

    Example:

    Paper jam... |
    (Paper)...... v_____________________________________________
    | >>>>>>>>>>>>>>>|
    |[]Registration sensor>>|>>>>>[] sensor -->exit tray
    | >>>>>>>>>>>>>[]>|Exit sensor
    | >>>>>>>>>>>>>>>|
    | >>>>>>>>>>>> >> |
    ______________________________________________
  • Eric1968
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2458

    #2
    Re: Ricoh Mp4000 (Df 3010)

    Did you change the feed clutch?

    Comment

    • Gift
      Service Manager

      1,000+ Posts
      • Mar 2011
      • 2458

      #3
      Re: Ricoh Mp4000 (Df 3010)

      Nice drawing but what's the DF jam counters telling location-wise?

      Comment

      • redneckstylin
        Trusted Tech

        100+ Posts
        • Sep 2011
        • 173

        #4
        Re: Ricoh Mp4000 (Df 3010)

        open adf top cover

        at back of cover there is 2 sensors blow them off than there is a little pocket that catches dust in it blow those out aswell been running into this lots espically when customers are scanning archive documents covered in dust introduce them to can air

        Comment

        Working...