sr3030 attatched to mp4000 jamming

[redneckstylin]

good morning all need some other eyes on this little issue


b/w mp 4000 with a 3030 finisher having troubles in finisher....


single page feeds out of upper tray do multiples it jams...replace finisher proof sensor gw01-0007 still same thing only on multiple pages single page it doesnt jam.............jam history says finisher proof exit jam...

[nmfaxman]

Re: sr3030 attatched to mp4000 jamming

It needs firmware updated for 3030 to work.
Might as well update all of it.

[redneckstylin]

Re: sr3030 attatched to mp4000 jamming

what i dont get is it has been at clients office for about a year now and no issues

[Eric1968]

Re: sr3030 attatched to mp4000 jamming

What's the jam history telling?

[redneckstylin]

Re: sr3030 attatched to mp4000 jamming

What's the jam history telling?

jam history says finisher proof exit jam...

[Llama God]

Re: sr3030 attatched to mp4000 jamming

Does it jam if you set the output tray to the shift tray?

[Llama God]

Re: sr3030 attatched to mp4000 jamming

And does it have a punch unit?

[Jomama46]

Re: sr3030 attatched to mp4000 jamming

I have had to replace the sponge rollers on the exit. (Gathering sponge rollers B478.3503, changed to B830-3503)

[Llama God]

Re: sr3030 attatched to mp4000 jamming

I have had to replace the sponge rollers on the exit. (Gathering sponge rollers B478.3503, changed to B830-3503)

Yes, these wear away to almost nothing and cause jams in the shift tray but not in the proof tray.

Are you feeling ok tonight?

[Jomama46]

Re: sr3030 attatched to mp4000 jamming

I was doing OK until a few minutes ago,

[Llama God]

Re: sr3030 attatched to mp4000 jamming

Sorry old chap

The more I think about this, the more I'm inclined to suggest that it does have a punch unit in it and it's the mylar on this which is causing the problem.

[redneckstylin]

Re: sr3030 attatched to mp4000 jamming

doesnt jam on shift tray just upper tray page comes half way out than jams

[redneckstylin]

Re: sr3030 attatched to mp4000 jamming

ill swing over there in a bit to see if a puncher unit is in it lol having a case of the mondays today

[redneckstylin]

Re: sr3030 attatched to mp4000 jamming

it does have punch

[Llama God]

Re: sr3030 attatched to mp4000 jamming

I'd go for the punch mylar B7027229 (this has been updated but I've had whisky and can't find it).