[Misc] fuser belt

[barney]

how do I change the fuser belt on a ricoh 3245 fuser unit

[totoro]

Re: fuser belt

Are you a tech? If you are, then it's not that difficult. If you're not, then call one.

[sandmanmac]

Re: fuser belt

Are you a tech? If you are, then it's not that difficult. If you're not, then call one.

Agreed. With all due respect, this site is not where you come for step-by-step instructions to routine copier service.

That said, I'm sure Paul will be along shortly with an offer for you........

[xordi69]

Re: fuser belt

need screwdriver and pliers, and a new fuser belt of course

[Llama God]

Re: fuser belt

need screwdriver and pliers, and a new fuser belt of course

Or you could do it right and replace the rollers and thermistors at the same time!

This is not a job for an end-user, by the way.

[Jomama46]

Re: fuser belt

Or replace the fuser as a unit, expensive? sure but so is a tech to come out and correct what you have done. Fuser is about $600.