Ricoh JP-1250

[Guest]

I would like to know what is the sc code - E6.

[Ricky965]

Ricoh JP1250 error code 6

E-06

Main Motor Lock

The CPU cannot detect the feed start
timing sensor signal within 2 seconds after
the main motor turns on, or the sensor
remains on for more than 0.5 seconds.
****
Main motor
Power to the main motor
Feed start timing sensor
Mechanical interference with
the drum drive

Listed above from the Service manual on chassis C231which is shown to be a JP1250 duplicator

[yakyitz]

Ricoh JP1250 error code 6

There are four sensors on the back wall which you will see as soon as you remove the drum. check if they have been knocked off, clip them back in and make sure the metal flag on the rear of the drum is not bent thereby knocking them off. good luck