[Error Code] RICOH 1035 - SC329 error

[semaj]

good day !

ANYBODY pls HELP how to reset/cancel the error SC 329 for this RICOH model 1035/1032. thank u very much in advance.

[JustManuals]

Re: RICOH 1035 - SC329 error

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

http://www.justmanuals.com


Paul@justmanuals.com

[vargue]

Re: RICOH 1035 - SC329 error

do laser setting 2109 400dpi and 600dpi if it's didn't disappeared clean senor in laser unit .if sensor is good and clean replace ld unit

[lupi]

Re: RICOH 1035 - SC329 error

good day !

ANYBODY pls HELP how to reset/cancel the error SC 329 for this RICOH model 1035/1032. thank u very much in advance.

[SC329 laser beam pitch adjustment error] - LD unit movement blocked - check connector routing

[SC329] - BICU PCB defective

[SC329] - LD unit movement blocked - check connector routing

[SC329] - check for bent pins on NVRAM

[SC329] - perform SP 2-109 - 3 and 4 - after clearing or replacing NVRAM

[SC329] - replace LD unit

goodluck...
regards,

[Matoku]

Re: RICOH 1035 - SC329 error

Go to service mode > 2109-03 and 2109-04.
Do this laser beam initial setting .
Normally it works if nothing problem with the lsu unit.

Good luck.