sc 681-001 on mpc3000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • keccik
    • May 2025

    #1

    sc 681-001 on mpc3000

    This code always shown when switched on the machine and can't do anything...what must i do please help!!
  • mikadonovan
    Senior Tech

    Site Contributor
    2,500+ Posts
    • May 2008
    • 2931

    #2
    Re: sc 681-001 on mpc3000

    You might have a problem with a toner cartridge (not sure which one). Otherwise, a RFID component isn't working correctly.
    NEVER ASSUME ANYTHING

    Comment

    • rsyarcia
      Hair Straightener Tech

      500+ Posts
      • Feb 2008
      • 711

      #3
      Re: sc 681-001 on mpc3000

      No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
      RFID: Communication error
      ��
      Communication error occurs when the RFID starts to communicate
      with the RFID receptor.
      ��
      Retry of RFID communication fails three times after the machine
      has detected the RFID communication error.
      ��
      Defective RFID reader and writer
      ��
      Disconnected ASAP I/F
      ��
      No memory chip on the toner cartridge
      ��
      Noise
      681 D
      1. Replace the RFID controller board.
      2. Replace the toner cartridge.
      Nobody is perfect..

      Comment

      • keccik

        #4
        Ribbon wire i already changed and still same prob...tell me where exactly the RFID board...

        Comment

        • rsyarcia
          Hair Straightener Tech

          500+ Posts
          • Feb 2008
          • 711

          #5
          Re: sc 681-001 on mpc3000

          Originally posted by keccik
          Ribbon wire i already changed and still same prob...tell me where exactly the RFID board...
          better use the service manual.
          Nobody is perfect..

          Comment

          • JustManuals
            Field Supervisor

            5,000+ Posts
            • Jan 2006
            • 9838

            #6
            Re: sc 681-001 on mpc3000

            This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

            Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

            Paul@justmanuals.com

            Comment

            • Gift
              Service Manager

              1,000+ Posts
              • Mar 2011
              • 2455

              #7
              Re: sc 681-001 on mpc3000

              Originally posted by keccik
              Ribbon wire i already changed and still same prob...tell me where exactly the RFID board...
              it is behind the controller box where you can also find the toner supply units

              Comment

              • keccik

                #8
                Re: sc 681-001 on mpc3000

                thanx gift

                Comment

                Working...