ricoh mpc 2000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jorge Carneiro
    • May 2025
    #1

    ricoh mpc 2000

    i have a problem in a Ricoh MPC 2000, when the machine goes to energy saver mode, she don`t wake up.
    Tags: None
    • kyrenecopy
      Trusted Tech

      100+ Posts
      • Apr 2012
      • 205
      #2
      Re: ricoh mpc 2000

      INstall Scanner firmware ver. 1.22 or higher
      Install System/Copy firmware ver. 1.67 or higher
      Testing 1-2-3, testing, testing. Is this thing on?

        Comment

        • Jorge Carneiro
          #3
          Re: ricoh mpc 2000

          Originally posted by kyrenecopy
          INstall Scanner firmware ver. 1.22 or higher
          Install System/Copy firmware ver. 1.67 or higher


          I`ve doing all latest Firmware.

            Comment

            • Gift
              Service Manager

              1,000+ Posts
              • Mar 2011
              • 2455
              #4
              Re: ricoh mpc 2000

              Doesn't it wake up at all (if you open the df/insert an original/press the soft-power button)? Or doesn't it wake up if you send a printjob?

                Comment

                • Jorge Carneiro
                  #5
                  Re: ricoh mpc 2000

                  Originally posted by Gift
                  Doesn't it wake up at all (if you open the df/insert an original/press the soft-power button)? Or doesn't it wake up if you send a printjob?


                  The only way to put the machine on is power off and on again by shuting down the interruptor

                    Comment

                    Previous template Next
                    Working...