Savin 4051sp Ready issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dr.silver
    Technician
    • Apr 2009
    • 38
    #1

    Savin 4051sp Ready issue

    I have a Savin 4051sp that is giving some issues. Machine come to ready really quick, No Please wait for fuser to heat up, But after one copy the machine stays in Please Wait Forever never going back to ready. Replaced fuser, Thermistor, Thermostats and the whole assembly no change. Formated the hard Drive and cleared memory. No I am stuck, the Manual doesnt even go into a problem like this. No Codes are even thrown. Any Ideas?
    Tags: None
    • mikadonovan
      Senior Tech

      Site Contributor
      2,500+ Posts
      • May 2008
      • 2937
      #2
      Re: Savin 4051sp Ready issue

      Disconnect the HDD and reboot. You will lose some functions but if the problem disappears replace the HDD.
      NEVER ASSUME ANYTHING

        Comment

        • Dr.silver
          Technician
          • Apr 2009
          • 38
          #3
          Re: Savin 4051sp Ready issue

          Found the Problem wasn't Hard Drive connector for the Drum unit wasn't seated in correctly. Machine is running!

            Comment

            Previous template Next
            Working...