wire clips for wireless install

[Jomama46]

Taking the type F wireless off of a trade in and the adhesive clips and velcro were tough to get off. I cant find a replacement part # anywhere. I found a bag with a couple and the # on the bag was M366-3641. Parts dept says it is invalid plus the M366 is not a product code.
Anybody have a idea where I might find these clips?
These are the clips that hold the antenna wire to the sides of the machine.

[Gift]

Re: wire clips for wireless install

no but I think the thread title is epic

what about using these plates: Buy Cable Tie Mounts Natural s/adhesive c/tie base, 38x38mm RS HC-3838 online from RS for next day delivery.

..in combination with wire straps

[Jomama46]

Re: wire clips for wireless install

no but I think the thread title is epic

what about using these plates: Buy Cable Tie Mounts Natural s/adhesive c/tie base, 38x38mm RS HC-3838 online from RS for next day delivery.

..in combination with wire straps

thanks Gift, this is helpful. Looks like about a quarter each.

[nmfaxman]

Re: wire clips for wireless install

Look in your sewing or hobby store.
Adhesive velcro in 1X5 strips 6 for $5.00.

And I would move the wireless away from the machine, not stick it to the back of it.

Copiers give off a lot of RF crap that makes wireless problematic at best.

[teebee1234]

Re: wire clips for wireless install

Taking the type F wireless off of a trade in and the adhesive clips and velcro were tough to get off. I cant find a replacement part # anywhere. I found a bag with a couple and the # on the bag was M366-3641. Parts dept says it is invalid plus the M366 is not a product code.
Anybody have a idea where I might find these clips?
These are the clips that hold the antenna wire to the sides of the machine.

I've ordered them in the past, I'll have to check and get back to you.

****** insert Jeopardy theme music here **********************

OK, found it after much searching.....

11050688 Clamp: KS-15 (the wire clamps with the sticky back, you'll find these all over my cars dash securing various cables -iphone, radar detector, cell phone power cable...)
D3775698 Velcro Fastener: Cover: Antenna (these are the industrial strength velcro, I use them quite a bit for other things. There is no fabric side to oppose the hook side, just heavyweight plastic hooks that you press together and are very difficult to separate. Order in pairs, each is about 1 in sq. I use these in my work car to secure my 110v power converter and 12v multiport adapter to the side of my center console.

[Jomama46]

Re: wire clips for wireless install

TeeBee, this is exactly what I was looking for!Thanks very much.