If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I will pass on the info to our clients IT personnel, Have a great evening.
Originally posted by sandmanmac
Never setup this particular model, but I'm sure it's the same as every single other Ricoh box: Under system settings / File transfer, program the "administrator email", and turn ON "auto specify sender name"
...Plus I found this (somewhat) similar post just 7 lines below yours
Never setup this particular model, but I'm sure it's the same as every single other Ricoh box: Under system settings / File transfer, program the "administrator email", and turn ON "auto specify sender name"
...Plus I found this (somewhat) similar post just 7 lines below yours
We have just delivered a MP C305SPF to one of our clients and their IT tech has installed the machine on their network but when they Scan to email they are prompted to register senders name. The did register the senders name but the machine will not send. Here is a photo of the displayed.
Leave a comment: