MP 4000

[poz31]

Is there setting to adjust so the machine will be on 1-1 mode

[nmfaxman]

Re: MP 4000

User tools/ copier settings/duplex

[SargeNZ]

Re: MP 4000

Also check that 2-2 copy is not saved as active in the default program. (program/program as defaults/yes)

[Masterchief]

Re: MP 4000

Also check that 2-2 copy is not saved as active in the default program. (program/program as defaults/yes)

Agreed, I hate when copiers do this

[SargeNZ]

Re: MP 4000

It seems that anything coming out with an 02 at the end of the model number does this by default, they sneakily put it in the PCL6 driver defaults too.

[knightfall]

Re: MP 4000

just setup the panel with 1 to 1 (simplex) and save it as the default by pressing the program button then press program as default and your done.

[Athlontini]

Re: MP 4000

Be sure to go into Simplified Display and reset it there too.